Three dimensional hole system combination flexible welding process equipment.

　　Three dimensions: represent three directions. Generally, fixtures are longitudinal and transverse without vertical directions. The platform has two directions, and the four edges can be used for vertical installation, achieving a three-dimensional combination. 3D flexible fixture workbench

　　Hole system: The main feature of this fixture is that from the platform to the accessories, there are standard holes without traditional threads or T-slots. Coupled with quick locking pins, assembly can be made fast and convenient, and positioning can be achieved. Flexible welding assembly workbench

　　Combination: Because all attachments are pre made, they can be combined and adjusted according to the needs of the product.

　　Flexibility: With the above-mentioned functions, the entire set of equipment can change according to the changes of the product. A set of fixtures can meet the needs of several products or dozens of products, greatly accelerating the process of product research and development and trial production, saving a lot of manpower, material resources, and financial resources (environmentally friendly and low-carbon products). 3D flexible tooling flat panel

　　Welding: This product is a universal fixture designed specifically for the manufacturing of welded products; Used for welding convenience, flexibility, and many different from traditional welding methods.

　　3D steel platform size: (material q345 can also be called 16mn)

　　Length x width (mm):

　　1000x1000/1200x1200/500x1500/200x1000/2400x1200/3000x1500/4000x2000

　　3D casting platform size: (cast iron ht300)

　　2000x1000/2400x1200/3000x1500

　　All 3D platforms have a side height of 200mm

　　2D platform size:

　　1000x1000, 2000 x 1000, 2400 x 1200, 1200 x 1200, 1500 x 1500, 3000 x 1500

　　Hole size:

　　φ 28 series platform: The hole tolerance is d10 level, and the locking pin that matches the platform is h7 level. The distance between the centers of adjacent holes is 100 ± 0.05mm

　　φ 16 series platform: The hole tolerance is d10 level, and the locking pin that matches the platform is h7 level. The distance between the centers of adjacent holes is 50 ± 0.05mm,

　　There are three types of worktable columns: height (divided into three types) with a load-bearing capacity of 2 tons, fixed (frame type) with a load-bearing capacity of 5 tons, movable (lifting type with a load-bearing capacity of 3 tons), and (brake universal wheel type with a load-bearing capacity of 1 ton). Welding fixture