Three dimensional hole system combination flexible welding process equipment.
Three dimensions: represent three directions. Generally, fixtures are longitudinal and transverse without vertical directions. The platform has two directions, and the four edges can be used for vertical installation, achieving a three-dimensional combination.
Hole system: The main feature of this fixture is that from the platform to the accessories, there are standard holes without traditional threads or T-slots. Coupled with quick locking pins, assembly can be made fast and convenient, and positioning can be achieved.
Combination: Because all attachments are pre made, they can be combined and adjusted according to the needs of the product.
Flexibility: With the above-mentioned functions, the entire set of equipment can change according to the changes of the product. A set of fixtures can meet the needs of several products or dozens of products, greatly accelerating the process of product research and development and trial production, saving a lot of manpower, material resources, and financial resources (environmentally friendly and low-carbon products).
Welding: This product is a universal fixture designed specifically for the manufacturing of welded products; Used for welding convenience, flexibility, and many different from traditional welding methods.
3D steel platform size: (material q345 can also be called 16mn)
Length x width (mm):
1000x1000/1200x1200/500x1500/200x1000/2400x1200/3000x1500/4000x2000
3D casting platform size: (cast iron ht300)
2000x1000/2400x1200/3000x1500
All 3D platforms have a side height of 200mm
2D platform size:
1000x1000, 2000 x 1000, 2400 x 1200, 1200 x 1200, 1500 x 1500, 3000 x 1500
Hole size:
φ 28 series platform: The hole tolerance is d10 level, and the locking pin that matches the platform is h7 level. The distance between the centers of adjacent holes is 100 ± 0.05mm
φ 16 series platform: The hole tolerance is d10 level, and the locking pin that matches the platform is h7 level. The distance between the centers of adjacent holes is 50 ± 0.05mm,
There are three types of worktable columns: height (divided into three types) with a load-bearing capacity of 2 tons, fixed (frame type) with a load-bearing capacity of 5 tons, movable (lifting type with a load-bearing capacity of 3 tons), and (brake universal wheel type with a load-bearing capacity of 1 ton).